The engine of a boat plays an important role in the boat’s performance. Inboard boats have their engines mounted inside the hull, so the maintenance for these boats is struggling.
The recommended maintenance for an inboard boat includes the following instructions.
- Flush the engine
- Winterize the engine
- Take a look a the propeller
- Change oil for the boat
- Clean the boat regularly
In this post, Windrider of the Rockies will give you more details of each instruction. Let’s check out together!
Properly maintaining your boat will keep it in perfect working order.
- 1 Recommended Maintenance For An Inboard Boat
- 2 Other Maintenance Tips For Your Boat
- 3 Final Words
Recommended Maintenance For An Inboard Boat
Properly maintaining your boat will help you cut down a lot of expenses for boat repair and replacement.
For an inboard boat, you should pay more attention to maintenance. Below are what you need to do to keep your inboard boat in perfect working order.
Flush the engine
Engine flushing is a crucial step in maintaining an inboard boat.
Flushing with proper cleaning fluid will clear away all the saltwater, sand, and other debris from your boat engine. In this way, the engine won’t get corroded and maintain its performance.
Debris can get into the engine through the air intake, so you need to cover it before flushing.
Winterize the engine
When the boating season ends, it’s necessary to winterize the boat engine. You can check the winterization guide in the manuals or follow the steps below.
- Check the engine and make sure that there’s no water left.
- Apply some anti-corrosion liquid to the engine. The liquid will protect the engine from corrosion and rust building up.
- Add gas into the tank if necessary
- Put some fuel stabilizer into the fuel, then turn on the engine to warm it up.
- Check and replace the water separators and oil filter
- Check and clean the freshwater plumbs and tanks
- Add antifreeze solution into the plumbing system to prevent freezing when the temperature is low.
- Store your boat in a dry place
The most vital part when winterizing the engine is to drain all the water from it. Any water left can damage the boat components when it gets frozen.
Besides, storing your boat when it’s still wet will create an environment for mildew, mold, and corrosion to develop.
Winterize the boat engine.
Take a look at the propeller
It’s easy for fishing lines, ropes, and anchor chains to get stuck into the propeller. They can damage the propeller if they contain metal pieces.
Therefore, you need to take out the propeller and remove any stuck lines or ropes. If the propeller gets any damage that affects its performance, you need to fix it immediately.
Change oil for the boat
You won’t have to wait until the end of the boating season to change oil for your boat. It’s necessary to make the oil replacement every 100 hours or according to the instruction manual.
You can change the oil by yourself following the manual or ask a dealer to do it for you.
Clean the boat regularly
Cleaning your inboard boat regularly is a simple and effective way to maintain its performance.
After every saltwater trip, you need to rinse the boat with fresh water. This action will help protect your boat from getting corrosion by saltwater.
Also, washing your boat will prevent dirt and debris from accumulating and affecting the boat’s operation.
Cleaning your inboard boat regularly to maintain its performance.
Other Maintenance Tips For Your Boat
So you have gone through the recommended steps for maintaining your inboard boat. Now, let’s take a look at some other practical boat maintenance tips.
Make a boat maintenance checklist
After getting a new boat, it’s necessary to list its equipment. If your vessel has no user’s manual, you can download one from the manufacturer’s website.
Next, you should check the manual for the installation and maintenance of the listed equipment. This step is to ensure that nothing goes wrong with your boat’s assembly.
In addition, add to the equipment list the maintenance schedule of each item. You can learn to do the simple tasks to take care of your boat.
For the complicated components, you can find some professional dealers to maintain them.
Take care of gel coat or fiberglass boat
Fiberglass is a commonly used material in making motorboats. Fiberglass boats will have a protective gel coat to prevent the effect of UV rays.
You need to know how to take care of this gel coat to keep your boat durable. The gel coat maintenance is not available in the user’s manual, so here are some tips for you.
You should clean your boat frequently with fresh water and soap solution. For stuck stains, you can rub them away with a brush.
If you leave the gel coat dirty for a long time, the protective wax will get damaged. Saltwater, sand, and other dirt can go through the coat to your boat’s hull.
In case your boat loses its shininess, you can compound it. After compounding the vessel, apply a thick coat of standard wax to keep your boat from dirt and grimes.
Moreover, you shouldn’t use any bleach to clean the boat. It can destroy the gel coat, so using a proper boat cleaner will be a better choice.
You should clean your boat frequently with fresh water and soap solution.
Many boat owners use canvas to cover the cockpits and other parts of the boat. The function of the canvas is to protect your boat against harmful UV rays.
The canvas on your boat will always look new if you take care of it in the right way. Regular cleaning is necessary to maintain your canvas. Besides, if it lost its water resistance, you can apply some waterproofing chemical to fix.
When the stitches on your canvas start degrading, you can take it to canvas shops for re-sewing. If you see wear on the canvas, it’s time to buy a new one.
Maintenance for metal components
Aluminum or stainless steel is the commonly used material to make most of the metal components on your boat.
They are prone to saltwater and will get corroded or rusted quickly. So, you need to clean these components carefully after each trip. To keep the luster of stainless steel items, you should polish them regularly.
Interior woodwork care
As interior woodwork doesn’t get exposed to the sun, they have high durability. However, you still need to take care of them to keep their finish bright.
To clean the wood, you can use a cloth dampened in a mild soap solution. If they are dull, you can take back their shininess with some varnish or lacquer.
As your boat will be in the water most of the time, the bottom is also a part you need to pay attention to.
Many sea creatures can cling to the bottom of the boat and harm your boat, especially those with hard shells. They can obstruct the flow of water on the bottom that making the vessel slow down.
In some cases, if you leave the boat full of dirt, it will take you more fuel to run. Therefore, it’s better to prevent the growth of creatures and clean the boat bottom.
A layer of toxic paint applied on the boat’s underside will be effective for preventing sea creatures. Also, you should scrub your boat every month.
If you are good at diving, you can do the cleaning by yourself. When cleaning, always check the propeller to see if there is a wire wrapped in it.
Another solution is having your boat bottom cleaned by professional drivers. The larger your boat is, the more they will charge you.
If you are good at diving, you can clean the boat bottom by yourself.
Properly store your boat
Another essential part of maintaining your boat is the way you store it. You need to store your boat properly to protect it from external impacts.
Proper storage means keeping your boat from the weather and preventing the growth of mold and mildew. You can consider the following methods to store your boat.
Many boat owners choose to store their boats outdoor, especially sailboats. This storage method is convenient, but you need to cover your boat carefully.
It’s better to have your boat shrink-wrapped by a professional. In this way, you will protect your boat from elements as well as ensure ventilation.
If you have enough space in your garage or warehouse, you should store your boat indoors. Indoor storage is the best way to keep your boat in the off-season. No sunlight, rain, or other weather elements can affect your boat.
When storing boats indoors, it’s necessary to keep your storage place ventilated. You can consider installing a ventilator and dehumidifier if the humidity is high.
In case of lack of space, you can rent a storage unit for your boat. This solution will cost you some money, but your boat will receive the best-storing conditions.
You can rent a storage unit for your boat
If you have difficulty storing your boat due to its large size, you can choose on-water storage.
For this method, you should buy storage services in harbors or marinas. They have specialized devices to prevent ice from damaging your boat in winter.
Above is our recommended maintenance for an inboard boat and some helpful tips for keeping boats in good conditions.
A boat is a valuable investment, so you should take care of it in the right way. Proper care will help increase your boat’s durability and lengthen its lifespan.
Thank you for following this post!
Reference: Boat Maintenance